Wireless LAN
To check the wireless LAN network status
Place the cursor over the Wireless Switch Utility icon (
A
A tooltip appears.
NOTE
The Wireless Switch Utility icons (
IEEE802.11a setting.
If the IEEE802.11a setting is changed in [Device Manager], the display will be changed accordingly.
Exchanging Data between Computers Using the Wireless LAN
To communicate between two computers using the wireless LAN and without using an access point, make the following
settings on each computer.
Set the network to be accessed as wireless ad hoc.
Set the network names to the same name.
Set the network authentication to the same authentication.
When using encryption, set the same encryption and the same network key on both computers.
and
) indicate the on/off status of wireless communication, not the
or
) on the notification area.
73