Panasonic Toughbook CF-Y5LWEZABM Reference Manual page 30

Sleep or Hibernation Functions
CAUTION
Do not perform the following operations until resuming is complete. After the display is resumed, wait approximately
15 seconds (normally) or 60 seconds (when the computer is on a network).
• Touch the keyboard (except for password input), Touch Pad, or power switch.
• Use an external mouse or other peripheral device.
• Connect or disconnect the AC adaptor.
• Close or open the display.
• Shut down or restart Windows.
• Enter sleep or hibernation (Wait approximately one minute).
• Operate the drive power/open switch.
• Operate the wireless switch.
• Insert and remove the SD Memory Card.
If the computer enters sleep while a USB keyboard or mouse is connected, touching the USB keyboard keys or mouse
will resume the computer.
Changing When the Computer Sleeps or Hibernates
Sleep
1
Click or
the computer sleeps].
2
Select the setting for [Put the computer to sleep:], and then click [Save changes].
The setting for hibernation may change unexpectedly when you change the setting for sleep. Confirm that the
time to enter hibernation is 1,080 minutes (default setting) or longer (below).
Hibernation
1
After the step
2
Double-click [Sleep], and double-click [Hibernate after].
3
Click the item and select the setting.
4
Click [OK].
on the notification area, and click [More power options] - [Change when
1 of "Sleep" setting (above), click [Change advanced power settings].
30