Connect The Cable - Panasonic Toughbook CF-W5LCEZZBM Reference Manual

LAN
CAUTION
Do not connect the telephone cable to the LAN port.
To ensure proper network operations, use a twisted pair cable (category 5 or higher) less than 100 m in length.
Do not use the standby or hibernation during communications (except when the Wake up from LAN function is in use),
as this may cause an error in data transmission or reception. The timeout function may engage even during data
transmissions, causing the computer to automatically go into standby or hibernation. When not using the Wake up
from LAN function, we recommend disabling the timeout function using the following menu.
[start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes]
1
Turn off your computer.
Do not use standby or hibernation.
2

Connect the cable.

Connect the LAN port (A) and the network system (server, HUB, etc.) using a
LAN cable.
3
Turn on the computer.
Wake up from LAN Function
This is a function of the internal LAN to automatically resume the computer from a network server when the computer is in the
standby or hibernation mode. To use this function, it is necessary to have a network environment that accommodates Wake
up from LAN. (The function is enabled in the default setting.)
Click [Device Manager] in [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware].
A
Double-click [Network adapters], and double-click the internal network adaptor.
B
71
LAN Port
A