Denver - IPO-2030 Smart Camera Manual

Denver - IPO-2030 Smart Camera Manual

Also See for IPO-2030:

Advertisement

Denver - IPO-2030 Smart Camera Manual

KIT CONTENT

FRIENDLY REMINDER

  • For video recording, BE SURE TO use CLASS 10 memory card or above (not included). Other kinds of memory card may cause unexpected results and should be avoided.
  • Anytime when you find the camera pan/tile function does not perform properly, calibrate the camera to get correct principle position (refer to step 8 of setup the camera section).
  • For better performance, please enable the video hardware acceleration function. This function only for Andriod (refer to the app introduction section).

PRODUCT OVERVIEW

PRODUCT OVERVIEW

Note: Press and hold the "Reset" button for 5 seconds, the system will be restored into factory default.

SETUP THE CAMERA

APP Download

Download and install the "IPO-2030" APP to your device.

itunes.apple.com

For iOS

play.google.com

For Android

Power up The Camera

Connect the power wires to the adapter supplied, and wait until the RED LED indicator becomes steady on. This process would be finished within 1 min and make sure the LED is flashing in RED.

Wireless Connection

  1. In the Wi-Fi setting of your smart device. Choose the Wi-Fi router with prefix of HD-xxxxxx (xxxxxx=Camera ID numbers). Then enter the default password 12345678.
  2. Launch the APP, tap to add the camera.
  3. Tap (QR code icon) and scan the QR code label on the back of the camera to bring up the DID information. Or tap "Search" to locate the camera.
  4. Enter the default password 123456.
  5. Tap "Save" when you done.
  6. Later, APP will request user to modify the default password to private password.

Wired Connection

Setup the Camera - Wired Connection

  1. Make sure your smartphone is connected your Wi-Fi router.
  2. Connect the camera's Ethernet cable to the Rj45 connect, and power on the camera with adapter.
  3. Launch the APP, tap the "Search" to locate the camera.
  4. Enter the default password 12345678 and save the settings.
  5. Later, APP will request user to modify default password to private password.

Note: In soft AP mode, the RED LED long flashes once followed by 2 short flashes. In normal mode, the LED is flashing in RED.

Wi-Fi Setting

  1. Tap then the advanced setting icon will appear on the screen.
  2. Enter the default password: 12345678
  3. Select your Wi-Fi router, and enter its password.
  4. The Camera will offline for around 40 seconds to reboot for Wifi connection. When camera connects to Wi-Fi router correctly, the RED LED will stay ON.
  5. In the Wi-Fi setting on your smart device again, make sure the Wi-Fi router you are connecting to is the same as the camera. If not, manually assign to it.

Note: If you fail to add the camera for several times, press and hold the "Reset" button for 5 seconds to reset it.

APP INTRODUCTION

APP INTRODUCTION

Follow the steps below for Event Playback

  1. Tap the icon to access the event list section.
  2. Select the time interval for the event list.
  3. Select the file you want to playback.
  4. If you want to store the files to the mobile device, tap to download the files (Best while under Wi-Fi enviornment due to larger high defination data size).

Enable video hardware acceleration (For Andriod)

  1. In the camera list, tap the
  2. Click the click box to enable video hardware acceleration.

CAMERA INSTALLATION

  1. Drill the mounting holes by using the aligmaent paper.
  2. Insert 4 screw anchors into the wall.
  3. Insert 2 screws into the screw anchors, reserved space 8 to 10 mm. Then Hang the camera on 2 screws.
  4. Fasten 4 screws by using hex key.

Note: Before mounting the camera, install the memory card if you prefer recording to local storage.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

Electrical and electronic equipment and batteries included contain materials, components and substances that may be harmful to your health and the environment if the waste material (electrical and electronic equipment and batteries) is not handled correctly.

Importer:
DENVER ELECTRONICS A/S
Omega 5A, Soeften DK-8382 Hinnerup
www.facebook.com/denverelectronics

www.denver-electronics.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Denver - IPO-2030 Smart Camera Manual

Advertisement

Need help?

Need help?

Do you have a question about the IPO-2030 and is the answer not in the manual?

Questions and answers

Table of Contents