Page 1
Make sure your mobile device is running iOS 8 or higher or Android 4.1 or higher. Make sure 2.4 GHz Wi-Fi network is used. 5 GHz network is not supported. Download and install the DENVER SMART HOME app from App Store or Google Play.
Page 2
Register an account on your DENVER SMART HOME app STEP1. Enter your email address. STEP 2. Enter the verification code and create a password. 3 Power connection How do I reset my device? . Use the reset pin to press and hold the Reset Button for several seconds until the camera starts to beep.
Page 3
Option 1: Use QR code STEP1 STEP 2 Choose “QR code” In the app, on the top right corner of the “Add device” screen, tap “Otherwise”. STEP 3 STEP 4 Enter your Wi-Fi Scan the QR Code network and with the camera. password.
Page 4
STEP1 In the app, on the top right corner of the main screen, Tap (+). Then choose “Smart Camera” STEP 2 Make sure the indicator light on the camera is flashing red, indicating the camera is ready to connect. If not, follow the instructions to reset the camera so that the indicator light flashes...
Page 5
5 How many cameras can I connect? DENVER SMART HOME app can connect an unlimited number of the devices in an unlimited number of device locations. A Wi-Fi router may have a limit on the number of the device for connection.
Page 6
Additional information is available at the technical department of your city. Hereby, Inter Sales A/S declares that the radio equipment type IIC-215 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the...
Need help?
Do you have a question about the IIC-215 and is the answer not in the manual?
Questions and answers