MODO assembly instructions To assemble the bed, you will need the following: a battery-powered screwdriver, a cross-head screwdriver, an 8mm Allen wrench, a hammer - two adults. Bed frame: Footrest (1) - 1 pc Side panels (2,3) - 2 pcs...
Page 3
MODO assembly instructions 1 Assembly of legs to the headboard and the footrest (1,4) with hex socket screws 2 Assembly of eccentrics (A) to boxes of ele- ments of the bed frame, the arrows indicate the outer edge 3. Assembly of mandrels in the side panels of the bed (2,3) 4.
Page 4
MODO assembly instructions 5. Connecting side panels (2,3) to the fo- otrest (1). 6. Tightening the eccentric with a screwdri- ver. 7. Connecting the legs (6,7) with the central board (5). 8. Assembly of the central board (5). 9. Assembly of the headboard (4) to the side panels (2,3).
Page 5
MODO assembly instructions 10. Screwing the headboard (4) with the side panels (2,3). www.mazzivo.pl...
Page 6
MODO assembly instructions A silent sleep system assembly instructions 1. Putting caps of the frame on the pegs. 2. Inserting the boards of the frame into the caps, as in the example shown in the pictu- res. www.mazzivo.pl...
Need help?
Do you have a question about the MODO and is the answer not in the manual?
Questions and answers