Troubleshooting (Basic - Panasonic Toughbook CF-T8EWATZJM Operating Instructions Manual

Troubleshooting (Basic)

Touch Pad/Touchscreen
The cursor does not work.
Cannot input using the
touch pad.
Cannot input using the
touchscreen.
Cannot input using the
touchscreen as the tablet
mode.
Cannot point the correct posi-
tion using the included stylus.
Reference Manual
The Reference Manual is not
displayed.
Others
No response.
28
When using the external mouse, connect it correctly.
Restart the computer by using the keyboard.
Press and press
U , and R to select [Restart].
Press ,
If the computer does not respond to keyboard commands, read "No response" (
Set [Touch Pad] to [Enabled] in the [Main] menu of the Setup Utility.
The drivers for some mice may disable the touch pad. Check your mouse's operating
instructions.
When mouse drivers are installed (i.e. IntelliMouse), the touchscreen does not work.
Reinstall the touchscreen driver.
Set [Touchscreen Mode] to [Auto] or [Tablet Mode] in the [Main] menu of the Setup Utility.
<Only for model with Windows XP Professional>
Set [Touchscreen Mode] to [Auto] or [Touchscreen Mode] in the [Main] menu of the Setup
Utility.
<Only for model with Windows XP Tablet PC Edition>
Set [Touchscreen Mode] to [Tablet Mode] in the [Main] menu of the Setup Utility.
Perform the touchscreen calibration (
Install Adobe Reader.
A Log on to Windows as an administrator.
B
Click (Start) and input "c:\util\reader\Setup.exe" in [Search programs and files]
Enter .
then press
Click [start] - [Run] and input "c:\util\reader\setup.exe", then click [OK].
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click [Help] -
[Check for Updates...].
Ctrl + Shift + Esc to open Task Manager and close the software application that
Press
is not responding.
An input screen (e.g., password input screen at startup) may be hidden behind another
Alt + Tab to check.
window. Press
Slide the power switch for four seconds or longer to shut down the computer, and then
slide the power switch to turn it on. If the application program does not work normally,
uninstall and reinstall the program. To uninstall,
(Start) - [Control Panel] - [Programs] - [Uninstall a program].
click
click [start] - [Control Panel] - [Add or Remove Programs].
two times, and press to select [Restart] and press
page 15).
Enter .
page 28 ).