Westinghouse WQE5600 User Manual page 28

28 www.westinghouse.com
CONCERN
The exterior of the appliance
is warm or hot to touch
This is normal because the
appliance transfers heat from
the inside out through the
outer panels and the divider
between the doors.
User interface will not
respond
To ensure settings are not
accidentally changed the
user interface will go into
sleep mode when not in use.
Press any button to wake user
interface
Alarms Sounding
Frost build up
Odours
Lights not working
The LED lighting is esigned
to turn on gradually. The
LED lighting is designed
to dim automatically if the
door is left opened for more
than 5 minutes and turn off
completely if the door is open
for more than 7 minutes.
Closing the door will reset
the timer.
WHAT TO DO
• Ensure the appliance has the external clearances recommended in
the section "Installing your new appliance".
• The exterior of the cabinet will be much warmer on warmer days it
may even feel hot to touch, as the appliance is working harder.
• Check that the user interface is in awake mode, refer to section
"About the user interface".
• Check that the user interface is not locked, refer to section "About
the user interface".
• If the user interface is frozen turn the appliance off for five minutes
for the memory to clear, then turn back on.
• Check that the user interface is not in Sabbath Mode, refer to control
instructions. (I&W models only).
• Check that all doors are fully closed.
• Ensure that the over temperature alarm is not being activated by hot
food placed in the freezer.
• Check if the drinks timer has ended, refer control instructions.
• Check that all doors are fully closed.
• Ensure that the doors are not opened too often.
• Ensure that the return air vents are not blocked with packaging.
• Ensure the seals are clean and not obstructed.
• The interior may need cleaning, refer to cleaning guide.
• Ensure that food is stored correctly as some food, containers and
wrapping can produce odours.
• Check appliance for old or unusual food.
• Ensure that the cord is plugged into a live power outlet and outlet is
switched on.
• Ensure that the household circuit breaker has not tripped or that the
fuse has not blown.
• Check that the user interface is not in Sabbath Mode, refer to control
instructions.
• Check the appliance features section to determine lighting
configuration for your model.