Westinghouse WQE5600 User Manual page 13

Function Icon
5
DrinksChill
Drinks Chill timer
indicator
6
Water Filter
Alert and
Reset
Standard model
7
Quick Chill
Control
I&W model
Quick chill indicator
Operation (depending on model)
The Drinks Chill timer is used to quickly chill a bottle
inside the freezer compartment and to warn the user
when it ends.
Tap on Drinks Chill button,
Freezer display shows 20 ,"Min" and Drink Chill LED
turns on.
The timer option is from 20 minutes and the user can
add time in 5 min intervals up to 45 minutes. After it
starts the timer will show the countdown minute by
minute.
NOTE:
When timer countdown is in progress, the timer duration
cannot be adjusted. User will need to deactivate Drinks
Chill and activate Drinks chill again to set a new timer.
"GOOD" LED turns on is mean the filter used
for 0-4 months.
"ORDER" LED turns on is mean the filter used
for 5 months , to remind user to order new water filter.
"REPLACE" LED turns on is mean the filter used
for 6 months,
Press and hold Water filter for 3 seconds to reset.
Status will reset to GOOD.
For Standard model
Tap on Quick chill button.
For I&W model
Press & Hold on Fridge digits for 3 seconds.
Tap on Fridge digits to adjust temperature.
When Quick chill is ON,
the Quick chill indicator lights up.
When Quick chill is OFF,
the Quick chill indicator turns off.
Use the Quick Chill when you add a large amount of
food to the refrigerator compartment after grocery
shopping or to quickly cooled your drink. When Quick
chill is on, the cold air circulate into the refrigerator to
temporarily reduce the temperature to 1°C for 6 hours,
Freezer compartment continue to run at set
temperature.
Quick chill auto turn off on either of this condition:
- 6 hours has elasped
- Fridge temp is adjusted
EN 13