Panasonic Toughbook CF-52AJC15AM Reference Manual page 86

Hard Disk Backup/Restore Function
6
Click [Restart].
The computer will restart.
If [Enter Password] is displayed during the following procedure, input the Supervisor Password or the User
Password.
7
Click [Next].
Do not specify keyboard layouts other than the one already selected.
8
If [Windows cannot find a system image on this computer] appears, connect to this unit
the storage media (e.g. external hard disk) on which the system image has been backed
up, and then click [Retry].
9
Click [Next].
Follow the on-screen instructions.
Start up System Recovery Options
To perform from [Advanced Boot Options]
Turn on the computer, and when [Panasonic] boot screen disappears, press and hold F8.
A
If [Enter Password] is displayed during the following procedure, input the Supervisor Password or the User Password.
Release your finger when [Advanced Boot Options] is displayed.
B
to select [Repair Your Computer] and press Enter.
Press
C
[System Recovery Options] appears.
Click [Next].
D
• Do not specify keyboard layouts other than the one already selected.
Select the user name registered on Windows.
E
Input the password, then click [OK].
F
To perform from the Product Recovery DVD-ROM for Windows 7.
Turn off the computer and insert the CD/DVD drive into the multimedia pocket (
A
Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed.
B
• The Setup Utility starts up.
• If the password is requested, enter the Supervisor Password.
Write down all of the contents of the Setup Utility and press F9.
C
• At the confirmation message, select [Yes] and press Enter.
Press F10.
D
• At the confirmation message, select [Yes] and press Enter.
• The computer will restart.
86
page 23).