Multimedia Pocket
3
Carefully insert the device into the multimedia pocket by push-
ing both corners until it surely fits in the slot.
The computer must be on when inserting the device.
Insert the device with the label side up.
CAUTION
Hold the device by its both sides. Otherwise the device may be damaged.
When raising the slot side upward and inserting the device, be careful not to apply any
impact to the device.
When you carry the computer, confirm that the release button is surely locked so that
the device does not fall.
Be sure to insert the device into the multimedia pocket for use.
NOTE
You can see that the device is recognized or not by clicking
nized (or if the media cannot be accessed), turn off the computer and reinsert the device.
and then double-clicking
24
. If the device is not recog-