Panasonic Toughbook CF-52AJC15AM Operating Instructions Manual page 24

Troubleshooting (Basic)
Display
During Simultaneous dis-
play, one of the screens
becomes disordered.
<Only for model with Mobile
®
Intel GM45 Express
Chipsets>
The external display does
not work normally.
DVD can not be played
back correctly.
Touch Pad/Touchscreen
The cursor does not work.
Cannot input using the
touch pad.
Cannot input using the
touchscreen.
Cannot point the correct posi-
tion using the included stylus.
Reference Manual
The Reference Manual is
not displayed.
24
When using the Extended Desktop, use the same display colors for the external dis-
play as those used by the LCD.
If you continue to experience problems, try changing the display.
Right-click on the desktop, and click [Graphics Properties...] - [Display Devices].
Click [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver
for Mobile] - [Display Devices].
Simultaneous display cannot be used until Windows startup is complete (during
Setup Utility, etc.).
When the [Command Prompt] is set to "Full Screen" by pressing Alt + Enter, the
picture is displayed on one of the screens only. When the window display is restored
by pressing Alt + Enter, the picture is displayed on both screens.
If the external display does not support the power saving function, it may not work nor-
mally when the computer enters the power saving mode. Turn off the external display.
Try playback by using Windows Media Player.
Refer to the following URL, then try to update WinDVD.
http://pc-dl.panasonic.co.jp/itn/support/faqs_en.html
When using the external mouse, connect it correctly.
Restart the computer using the keyboard.
Press and press twice, and press
, U, and R to select [Restart].
Press
If the computer does not respond to keyboard commands, read "No response" (
Set [Touch Pad] to [Enabled] in the [Main] menu of the Setup Utility.
The drivers for some mice may disable the touch pad. Check your mouse's operat-
ing instructions.
Set [Touchscreen Mode] to [Auto] or [Tablet Mode] in the [Main] menu of the Setup
Utility.
Set [Touchscreen Mode] to [Auto] or [Touchscreen Mode] in the [Main] menu of the
Setup Utility.
When mouse drivers are installed (i.e. IntelliMouse), the touchscreen does not work.
Reinstall the touchscreen driver.
Perform the touchscreen calibration (
Install Adobe Reader.
A Log on to Windows as an administrator.
B Click (Start) and input "c:\util\reader\setup.exe" in [Start Search] then press
Enter.
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click
[Help] - [Check for Updates...].
B Click [start] - [Run], input [c:\util\reader\setup.exe], then click [OK].
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click
[Help] - [Check for updates...].
to select [Restart] and press Enter.
page 14).
page 25).