Connecting Peripherals - Panasonic Toughbook CF-51PF66EBM Reference Manual

Troubleshooting (Advanced)
Wireless LAN (Only for model with wireless LAN)
Access point is not detected.

Connecting Peripherals

An error occurs while installing the
driver.
Confirm that / /
If / / is not displayed on the notification area, select [Wireless On]
in [Intel PROSet/Wireless] screen (
When is displayed on the notification area, follow the steps below.
Right-click , and select [Wireless Off].
A
Right-click , and select [Wireless On].
B
Right-click on the notification area, and click [Repair].
Right-click or on the notification area, and change the IEEE802.11a
setting.
• If you are in the location not allowed for IEEE802.11a (5 GHz wireless LAN)
communication, turn off Wireless LAN and then enable IEEE802.11a. Be sure
to disable IEEE802.11a before you turn on Wireless LAN.
• After this procedure, you may need to return the settings for your application.
If the above procedures do not solve the problems, ask the system administra-
tor or the person in charge of the network.
When you install a driver of card or peripheral device, make sure that the driver
is compatible with the operating system. If it is not compatible, malfunction may
occur. For information about the driver, contact the manufacturer of the periph-
eral device.
Before connecting peripheral equipment, first determine the media that
contains the peripheral device's driver (e.g., CD-ROM), then attach the device
for that media to the multimedia pocket. Once the installation screen for the
device's driver appears, equipment you then connect to the multimedia pocket
will not be recognized.
is displayed on the notification area.
page 53).
75