Panasonic Toughbook CF-51PF66EBM Reference Manual page 54

Wireless LAN
NOTE
You need to set the profile for each user.
The settings depend on the network environment. For further information, ask the system administrator or the person
in charge of the network.
For further information of Intel
To reinstall Wireless LAN Switch
Uninstall Wireless Switch Utility if you have installed it.
A
Click [start] - [Run], input "c:\util\wlansw\setup.exe", and then click [OK].
B
Follow the on-screen instructions.
If the [Confirm File Deletion] message appears, click [OK] and then [Finish]. Perform step
Setting the Wireless LAN Standard IEEE802.11a
In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is restricted by law. (⇒ Operating
Instructions "Read Me First")
1
Click or
2
Click [802.11a Enabled] or [802.11a Disabled].
NOTE
If IEEE802.11a is enabled or disabled while the computer is connected to an IEEE802.11b/g access point, the connec-
tion will be temporarily interrupted.
You can also change the IEEE802.11a setting in [Device Manager].
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].
A
Click [Network adapters] and double-click [Intel(R) PRO/Wireless 3945ABG Network Connection].
B
Click [Advanced], and then select [Wireless Mode] in [Property].
C
Remove the check mark from [Use default value] in [Value], and select the settings (e.g., [802.11a and 802.11g]).
D
Click [OK].
E
®
PROSet/Wireless software, refer to [Help] in the menu bar.
on the notification area.
54
again.
B