Sd Card Setup - Panasonic Toughbook CF-51PF66EBM Reference Manual

SD Security
Inserting a specific SD Memory Card can work as an alternative to entering password in the cases below. Format the card
and make the necessary settings.
Starting up the computer
Resuming the computer from standby/hibernation or screensaver
Logging on to Windows
NOTE
You can start up the computer by entering the Supervisor Password or User Password when you do not use the SD
Memory Card.
Use the formatted SD Memory Card (
This function works only with the SD Memory Card slot. It does not work with other devices such as an SD card
reader/writer connected through USB port.
You cannot use this function together with the fingerprint security (optional).
You can use the setup SD Memory Card as an ordinary card on the computer and other devices.
You can use a single setup SD Memory Card for multiple computers. However, when using the card to log on to Win-
dows, you need to use the same logon user and the same password on all of the computers.

SD Card Setup

Preparation
To start up the computer
Set the Supervisor Password in the Setup Utility (
To use to log on to Windows or to resume from standby/hibernation/screensaver
Set the Windows logon user and the password in [Control Panel] in advance. For further information, refer to the Windows
Help.
1
Log on to Windows as an administrator.
2
Insert the SD Memory Card in the SD card slot.
If [Secure Digital storage device] appears, click [Take no action], then click [OK].
3
Start the SD Card Setup program.
Click [start] - [All Programs] - [Panasonic] - [SD Card Setup].
4
Click [Next] in the Welcome screen.
page 34).
page 8). (You can also set it during the initialization procedure.)
37