Related Manuals for mitoredlight MitoPOD
Summary of Contents for mitoredlight MitoPOD
- Page 1 MitoPOD USER MANUAL www.mitoredlight.com © 2025 Mito Red Light, LLC. All rights reserved.
-
Page 2: Table Of Contents
CONTENTS Recommendations and cautions............... 03 Contraindications and precautions ............06 Indications of use.......................08 User guidance ......................09 Package contents ...................... 11 User Instructions ......................10 Cleaning and maintenance ................16 Troubleshooting ......................18 Specifications ......................19 Disclaimer and warranty ..................22 About us .......................... -
Page 3: Recommendations And Cautions
RECOMMENDATIONS Please read the complete instruction manual before using the MitoPOD as it will give you a better understanding of how the product works and get the best from your red light therapy session. Recommendations: Do not exceed 20 minutes of use in one therapy session. - Page 4 Do not carry, pull, or lift the device by its cord. Do not use the device if exposed to or submerged in water—unplug immediately. Use GFCI outlets in wet areas. Do not operate near flammable or combustible products or vapors. www.mitoredlight.com...
- Page 5 This device contains a multiple socket outlet. Do not place it on the floor. Do not place unauthorized equipment into the socket outlet provided with this device. If the device is placed on the floor, it could pose a hazard due to its built-in socket outlet/power cord. www.mitoredlight.com...
-
Page 6: Adverse Reactions
If you have any adverse reactions from using this device, stop using it immediately. Note: If you experience any discomfort, such as skin discoloration, skin damage, skin irritation or any other concerns that develop, stop using the device immediately and consult your physician. www.mitoredlight.com... - Page 7 PRECAUTIONS Stop using the MitoPOD if you experience any adverse reactions. If you have a reaction when using the device, please consult a physician as you may be light sensitive. Discontinue use if the device overheats or becomes uncomfortably hot.
-
Page 8: Indications Of Use
PRODUCT DESCRIPTION The MitoPOD is a full-body device equipped with 2,320 portable LEDs. It is shaped like a sleeping bag to provide a complete full-body experience. The pod consists of two parts (an upper and a lower section) designed to accommodate users of different heights. -
Page 9: User Guidance
It is also possible that a smaller amount of light reaches deeper tissues, though this has not been definitively confirmed and any difference is not expected to be significant. www.mitoredlight.com... - Page 10 MAKE SURE TO NEVER USE IT ON DAMAGED SKIN OR OPEN WOUNDS. Frequency of sessions The device offers a selectable session time ranging from 1 to 30 minutes. However, the recommended usage is 15 minutes per session, five days per week, for a period of 6 to 8 weeks. www.mitoredlight.com...
-
Page 11: Package Contents
Mito Red for assistance and send a picture of the damaged part, a picture and your order # along with your e-mail. Customer service might ask you for more information. A - MitoPOD (remove thin protective barrier before first use) B - Carrier bag C - 2 x Controllers... -
Page 12: User Instructions
1. For the first side of the MitoPOD, connect the male end of the remote cord into the cord that is attached to the MitoPOD (1). Be sure to line up the slot of both sides and once attached press firmly and tighten middle... -
Page 13: Using The Remote
"+" and "-". The session time and brightness are also used in the same way. A symbol will highlight the selected setting for adjustment. With each press, a toggle is made between the three parameters www.mitoredlight.com... - Page 14 This calming effect is designed to help users feel more relaxed. To activate or deactivate the breathe function, press the Set button and select Breathe On or Off from the menu. Display window (+) button Set button Power button (-) button www.mitoredlight.com...
- Page 15 When the set session time is over or when the power button “power” is pressed for 3 seconds, the device will shut down. After your session, unplug the power cable to reduce the risk of fire or electric shock. www.mitoredlight.com...
-
Page 16: Cleaning And Maintenance
To protect the device and ensure long-term functionality: Storage Temperature: –20°C to +60°C Relative Humidity: 30% to 90% RH (non-condensing) Pressure: 700 hPa to 1060 hPa Avoid exposing the device to extreme temperature fluctuations, direct sunlight, or environments with high moisture. www.mitoredlight.com... - Page 17 As each city has its regulation of disposal of e-waste, please learn about recycling or disposal programs in your local area by searching “E-waste recycling or disposal” online. You can also contact the relative department in your city directly to consult the policy. www.mitoredlight.com...
-
Page 18: Troubleshooting
Perform normal operations set times and adjust the followed. according to the instructions. brightness. The device has been used The device suddenly shuts Restart the device after it cools for too long, causing it to down. down. overheat and shut down. www.mitoredlight.com... -
Page 19: Specifications
SPECIFICATIONS Basic Specification Product/Model name MitoPOD Input: 100-240Vac, 50/60Hz, 1.4-0.7A; Power source Output rated: 24Vdc, 5.0A; 120W Dimensions(L*W*H) 62 inches x 24 inches x 8 inches Energy Source LEDs Weight 13.5 pounds Wavelengths 660nm (Red) & 810nm & 830nm (NIR) Total Irradiance: 223.8w/m2... -
Page 20: Symbols And Meanings
Atmospheric pressure limitation Type BF is applied to the lamp pod part Batch code Serial number Protects against fixed foreign objects with a diameter of more than 12.5 mm and is waterproof against drips with an inclination of 15° www.mitoredlight.com... - Page 21 Lamp classification group in IEC 62471:2006 Indicates that the electromagnetic interference from the device is under the limits approved by the FCC Symbol for CE Mark. Indicates that the device compliants with the RoHS Directive Symbol for certification TÜV Rheinland UL Recognition Service www.mitoredlight.com...
-
Page 22: Disclaimer And Warranty
WARRANTY The MitoPOD has a warranty of one (1) year, from delivery of device. The warranty is valid only to the original purchaser if item purchased directly from www.mitoredlight.com or authorized reseller and is non-transferable. The warranty period starts the date the original purchased unit is delivered. -
Page 23: About Us
If you have any further questions, please feel free to contact us at: info@mitoredlight.com You can also call our phone number Monday - Friday 9am - 5pm MST... - Page 24 User Manual and Instructional Videos This user manual and instructional videos can be found here: https://mitoredlight.com/pages/user-manual Updated June 2025 www.mitoredlight.com /mitoredlight @MitoRedLight /mitoredlightofficial @mitoredlightofficial...
Need help?
Do you have a question about the MitoPOD and is the answer not in the manual?
Questions and answers