Panel Controls: Mitoadapt Series - mitoredlight MitoADAPT User Manual

PANEL CONTROLS:
MitoADAPT Series
Once your panel is plugged in and
powered on, the home screen will
appear. Using the '+' and '-' buttons
you can adjust the time for the current
session. If all the other settings look
good, press 'GO' to start and stop your
session.
To adjust the default time, mode,
Bluetooth connectivity, and brightness
settings press 'Set' and toggle between
each setting using the '+' and '-'
buttons. Once you have adjusted these
settings, press 'GO' to go back to the
home screen, and then 'GO' again to
start/stop your session.
Please note, changing the time on the
setting screen will not affect the current
session.
Once a new default time is selected,
press the go button to save the selection
then turn off the power switch on the
back of the unit and turn the switch
back on. Your new default time will be
displayed.
15
www.mitoredlight.com