Download Print this page

Fisher & Paykel WA3927G2 Troubleshooting page 2

Solving wash problems

Advertisement

Was the washer overloaded? Try reducing your load size.
Not enough detergent to hold the lint in suspension.
Over drying in a dryer can cause a build-up of static electricity in synthetic fabrics and cause them to attract lint.
DETERGENT RESIDUE
Was the washer overloaded? Try reducing your load size. Items require space to move in the wash basket.
Did you use too much detergent?
Try using less detergent
Some detergents need to be pre-dissolved before being added to the washer. Check the detergent instructions.
Cold ambient temperatures, cold washes and/or short agitation times may not allow the detergent to dissolve
properly. Try pre-dissolving the detergent before adding it to the machine. You may also like to program the
Controlled Cold temperature option (refer to 'Changing Pre-set Options - Wash Temperature').
Did you use the most appropriate wash cycle?
BLACK OR GREY marks on clothes
A build up caused by the interaction of fabric softener and detergent can flake off and mark clothes (refer to 'Before
You Wash - Scrud').
Insufficient detergent for the amount of soil on the clothes, can result in grey marks on clothes (refer to 'Detergent').
DYE TRANSFER
Wash and dry non-colorfast clothes separately
Non-colorfast clothes left sitting in a washer or laundry basket can transfer dye onto other clothes.
TANGLING
Washing with too much water (ie under loading) can cause the clothes to tangle around one another.
Do not load the washer by wrapping items around the agitator, eg place items, especially sheets, in the basket as
loose parcels.
https://producthelp.fisherpaykel.com/us/Wash/Top_Loaders/WashSmart/WA3927G2/User_Guide_WA3927G2/19_Solving_W...
Updated: Sun, 09 Apr 2023 02:40:54 GMT
Powered by
2

Advertisement

loading