Stihl FSE 60 Instruction Manual page 23

2 Safety Precautions and Working Techniques
STIHL recommends the use of genuine STIHL
tools and accessories. They are specifically
designed to match the product and meet your
performance requirements.
Never attempt to modify your power tool in any
way since this may increase the risk of personal
injury. STIHL excludes all liability for personal
injury and damage to property caused while
using unauthorized attachments.
2.3 Applications
Depending on the cutting attachment fitted, use
your power tool only for cutting grass, over‐
growth and similar materials.
Do not use the power tool for any other purpose
because of the increased risk of accidents and
damage to the power tool itself. The product
must not be modified in any way - this may also
lead to accidents or damage to the unit.
2.4 Clothing and Equipment
Wear proper protective clothing and equipment.
Clothing must be sturdy but allow
complete freedom of movement.
Wear close-fitting clothing – a boiler‐
suit, not a loose work jacket.
Do not wear clothing which could become trap‐
ped in wood, brush or moving parts of the
machine. Do not wear a scarf, necktie or jewelry.
Tie up and secure long hair above your should‐
ers.
Wear sturdy shoes with non-slip
soles.
WARNING
To reduce the risk of eye injuries,
wear close-fitting safety glasses in
accordance with European Standard
EN 166. Make sure the safety
glasses are a snug fit.
Wear face protection and make sure it is a good
fit. Face protection alone is not sufficient to pro‐
tect the eyes.
Wear "personal" sound protection, e.g. ear
defenders.
Wear sturdy protective gloves made
of a resistant material (e.g. leather).
STIHL offers a comprehensive range of personal
protective equipment.
0458-282-9621-B
2.5 Transporting the Unit
Always switch off the machine and unplug it from
the mains plug.
Carry the machine hanging from the shoulder
strap or properly balanced by the shaft or loop
handle.
Transporting by vehicle: Properly secure the
machine to prevent tipping over and damage.
2.6 Before Starting Work
Check the unit
Check that your machine is in safe operating
condition – refer to appropriate sections in the
User Manual:
– The starting lockout lever and trigger switch
must move freely – the switch must return to
the idle position when it is released.
– Use only an approved combination of cutting
attachment, deflector, handle and carrying
strap. All parts must be assembled properly
and securely. To reduce the risk of injury,
never use metal cutting attachments!
– Check that the cutting attachment is properly
and securely mounted and in good condition.
– Check safety devices (e.g., deflector for cut‐
ting attachments) for damage and/or wear.
Always replace damaged parts. Never operate
the unit with a damaged deflector
– Keep the handles dry, clean and free from dirt,
for safe control of the power tool
– Adjust handle to suit your height and reach.
To reduce the risk of accidents and personal
injury, do not operate the unit if it is not in proper
condition!
Only operate the unit if all of its components are
undamaged and securely mounted.
Never attempt to modify the controls or safety
devices.
Before switching on your power tool, make sure
the cutting attachment is not touching the ground
or any other object.
Avoid contact with the cutting attach‐
ment – risk of injury!
Note that the cutting attachment con‐
tinues to run for a short period after
the power tool is switched off – fly‐
wheel effect.
Electrical connection.
Reduce the risk of electric shock:
English
23