Download Print this page

Fisher & Paykel OR60SDBGFX2 Manual page 2

Hide thumbs Also See for OR60SDBGFX2:

Advertisement

if you choose to use a commercial stainless steel cleaner, please read the label to make
sure it does not contain chlorine compounds as these are corrosive and may damage the
appearance of your cooker.
Cleaning the gas cooktop
Maintenance
Period
• Clean gas cooktop as per following instructions.
Daily
• Remove all burner parts, and clean using a non-abrasive detergent. Rinse in cold water, dry
Monthly
• Clean the ignitor carefully, using a toothbrush and methylated spirits.
• Contact your local authorised gas Service Agent to perform a thorough check on all gas
Every 3-4
years
Burner parts and trivets
• You can remove and clean these parts with hot soapy water or non-abrasive detergents. Clean spills regularly
before they become burnt on. Do not wash these parts in a dishwasher.
• After cleaning, check that the burners and their flame spreaders are dry before replacing correctly.
• It is very important to check that the burner flame spreader and the cap have been correctly positioned. Failure
to do so can cause serious problems.
to avoid damage to the electronic ignition, do not try to light a burner without all burner
parts correctly in place.
https://producthelp.fisherpaykel.com/au/Cook/Freestanding_Cookers/Dual_Fuel/OR60SDBGFX2/User_Guide_OR60SDBGFX...
thoroughly, and replace.
components on the gas cooker.
Description
Updated: Wed, 12 Apr 2023 09:13:40 GMT
Powered by
2

Advertisement

loading