Table of Contents
Advertisement
When Auto Heat-Reduce is Set
During rapid heat will flash
alternately with the heat
setting you have selected.
The amount of time the cooking zone will rapidly heat for depends on the heat setting you have selected. See below
chart for rapid heat times.
Selected Heat Setting
1
2
3
4
5
6
7
8
To cancel Auto RapidHeat (while A is still flashing)
Turn the control dial to a lower heat setting or back to 0 (OFF). Increasing the heat setting to 9 will also cancel Auto
RapidHeat.
https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Induction/OR90SCI1X1/User_Guide_OR90SCI1X1/05_...
Approximate Time at Rapid Heat
40 seconds
1 minute
2 minutes
3 minutes
4 minutes
7 minutes
2 minutes
3 minutes
When rapid heat is finished
will stop flashing and the temperature will automatically
reduce to the heat setting you have selected.
Updated: Wed, 12 Apr 2023 02:31:29 GMT
Powered by
9
Advertisement
Table of Contents
