Table of Contents
Advertisement
Accessories
*The bucket extension kit and the grapple kit cannot be installed on the bucket at the same time.
Product Description
The Ventrac power bucket is designed solely for the purposes of digging, scooping, and transporting materials
such as soil, mulch, sand, and gravel.
The power bucket is hydraulically controlled, allowing for smooth, effortless operation. The power bucket is
designed to sit upright after detachment, with the lift arms in the proper position for reattachment.
If the power bucket is used on a power unit equipped with weight transfer, increasing the weight transfer set-
ting on the power unit will increase the lifting capacity of the power bucket.
Optional teeth can be mounted on the power bucket's cutting edge to help break up and loosen compacted soil.
An optional extension kit can be mounted on the power bucket to increase the bucket capacity (volume) when
using for lighter materials such as mulch.
An optional grapple kit
logs, brush, or debris.
^The optional grapple kit requires the power unit to be equipped with dual hydraulic auxiliary couplers.
Why Do I Need an Operator's Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely operate and
maintain your machine, and to avoid injury and product damage. It is divided into chapters for convenient refer-
ence of the appropriate information.
You must read and understand the operator's manual for each piece of Ventrac equipment you own. Read-
ing the operator's manual will help you become familiar with each specific piece of equipment. If this manual
becomes damaged or unreadable, it should be replaced immediately. Contact your local Ventrac dealer for a
replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both the
power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine while
getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual may
result in personal injury and/or damage to the equipment.
INTRODUCTION
Venture Products Inc. is pleased to provide you with your new
Ventrac power bucket! We hope that Ventrac equipment will pro-
vide you with a ONE Tractor Solution.
Please visit our website, or contact your authorized Ventrac
dealer for a complete list of items available for your new power
bucket.
Item Description
Power Bucket Teeth Kit (HE302 / HE482)
Power Bucket Grapple Kit* (HE482 only)
Power Bucket Extension Kit* (HE482 only)
can be mounted on the power bucket to allow the power bucket to pinch and carry
^
Introduction - 4
Part Number
70.8124
70.8123
70.8159
Advertisement
Table of Contents
