Introduction; Product Description; Why Do I Need An Operator's Manual - Venture Products Ventrac ET202 Operator's Manual

Turbine blower
Table of Contents

Advertisement

Accessories

Product Description

The Ventrac ET202 turbine blower is designed to blow large volumes of air and is much quieter than a conven-
tional blower. The turbine blower can be used to blow leaves, light snow, and to remove debris from sidewalks,
parking lots, and other areas.
The turbine blower's front discharge nozzle can be hydraulically rotated 360 degrees. The turbine blower can
be used to clear paths by pointing the discharge nozzle down. The discharge nozzle can be pointed to either
side of the blower to move debris in the desired direction. The discharge nozzle can be pointed up to remove
loose leaves from trees.
An optional light kit
provides additional lighting to the right and left sides of the turbine blower.
*
*The power unit must be equipped with an optional 12 volt front kit.

Why Do I Need an Operator's Manual?

This manual has been created to help you gain the important knowledge of what is needed to safely operate and
maintain your machine, and to avoid injury and product damage. It is divided into chapters for convenient refer-
ence of the appropriate information.
You must read and understand the operator's manual for each piece of Ventrac equipment you own. Read-
ing the operator's manual will help you become familiar with each specific piece of equipment. If this manual
becomes damaged or unreadable, it should be replaced immediately. Contact your local Ventrac dealer for a
replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both the
power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine while
getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual may
result in personal injury and/or damage to the equipment.

INTRODUCTION

Venture Products Inc. is pleased to provide you with your new
Ventrac turbine blower! We hope that Ventrac equipment will
provide you with a ONE Tractor Solution.
Please visit our website, or contact your authorized Ventrac
dealer for a complete list of items available for your new turbine
blower.
Item Description
Light Kit
Introduction - 4
Part Number
70.8230

Advertisement

Table of Contents
loading

Table of Contents