Table of Contents
Advertisement
for Ventrac Power Units, Attachments, & Accessories
•
If the fuel tank must be drained, it should be drained outdoors into an approved container.
•
Check the fuel lines for tightness and wear on a regular basis. Tighten or repair them as needed.
•
The fuel system is equipped with a shut-off valve. Shut off the fuel when transporting the machine to and
from the job, when parking the machine indoors, or when servicing the fuel system.
Hydraulic Safety
•
Make sure the hydraulic connections are tight and all hydraulic hoses and tubes are in good condition. Re-
pair any leaks and replace any damaged or deteriorated hoses or tubes before starting the machine.
•
Hydraulic leaks can occur under high pressure. Hydraulic leaks require special care and attention.
•
Use a piece of cardboard and a magnifying glass to locate suspected hydraulic leaks.
•
Keep your body and hands away from pinhole leaks or nozzles that eject high pressure hydraulic fluid. Hy-
draulic fluid escaping under high pressure can penetrate the skin causing serious injury, leading to severe
complications and/or secondary infections if left untreated. If hydraulic fluid is injected into the skin, seek
immediate medical attention no matter how minor the injury appears.
•
The hydraulic system may contain stored energy. Before performing maintenance or repairs on the hydrau-
lic system, remove any attachments, engage the parking brake, disengage the weight transfer system (if
equipped), shut off the engine, and remove the ignition key. To relieve pressure on the auxiliary hydraulic
system, shut off the power unit engine and move the hydraulic control lever left and right before disconnect-
ing the auxiliary hydraulic quick couplers.
SAFETY
General Safety Procedures
Safety - 11
Advertisement
Table of Contents
