Panasonic Toughbook CF-19DDGZXVM Operating Instructions Manual page 29

Display
<Only for model with GPS>
The cursor cannot be con-
trolled properly.
Touch Pad / Touchscreen (only for model with touchscreen)/Dual Touch (only for model with dual touch)
The cursor does not work.
Cannot input using the touch
pad.
<Only for model with touch-
screen>
Cannot input using the
touchscreen.
Cannot point the correct
position using the included
stylus/digitizer pen.
Reference Manual
The Reference Manual is
not displayed.
Operate the following steps.
A Set [GPS] to [Disable] in the [Advanced] - [Serial Port Settings] of the Setup Utility.
F10
B Press and select [Yes] at the confi rmation message, and press
The computer will restart.
C Log on to Windows as an administrator.
D Click (Start) and input "c:\util\drivers\gps\GPSVista.reg" in [Start Search], and
Enter
press .
E Click [Yes], click [Yes] and click [OK].
Then restart the computer.
F2
F Press while [Panasonic] boot screen is displayed.
G Set [GPS] to [Enable] in the [Advanced] - [Serial Port Settings].
F10
H Press and select [Yes] at the confi rmation message, and press
When using the external mouse, connect it correctly.
Restart the computer using the keyboard.
Press and press
Press , , and to select [Restart].
U R
If the computer does not respond to keyboard commands, read "No response"
( page 30).
Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.
The drivers for some mice may disable the touch pad. Check your mouse's operating
instructions.
Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main] menu of the Setup Utility.
Set [Touchscreen Mode] to [Auto] or [Touchscreen Mode] in the [Main] menu of the
Setup Utility.
<Only for model with touchscreen>
Perform the touchscreen calibration (
<Only for model with dual touch>
Perform the digitizer calibration and Touchscreen calibration (
Use the included digitizer pen.
On the Windows logon screen or the Welcome screen, you may not be able to point the
correct position using the included digitizer pen. Use the keyboard or the touch pad to
log on.
Install Adobe Reader.
A Log on to Windows as an administrator.
B Click (Start) and input "c:\util\reader\Setup.exe" in [Start Search] then press
Enter
.
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click [Help]
- [Check for Updates...].
B Click [start] - [Run], input [c:\util\reader\Setup.exe], then click [OK].
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click [Help]
- [Check for updates now].
two times, and press to select [Restart] and press
page 17).
Enter
.
Enter
.
.
Enter
page 17).
29