Panasonic Toughbook CF-19DDGZXVM Operating Instructions Manual page 13

N: Security Lock
A Kensington cable can be connected.
For further information, read the manual that comes
with the cable.
O: External Display Port
Reference Manual "External Display"
P: Serial Port
Q: RAM Module Slot
<For model without Camera>
Reference Manual "RAM Module"
This computer contains a magnet and magnetic products at the locations
circled in the illustration at right. Avoid leaving metallic object or magnetic me-
dia in contact with these areas.
Switching to the Tablet mode
Attaching the stylus to the computer
R: External Antenna Connector
S: Expansion Bus Connector
T: Camera
<For model with Camera>
Remove the protection seal on the camera before us-
ing the camera.
A Lift up the display so it stands perpendicular to the body.
B Slide and hold the display release latch (A), and rotate the display
clockwise until it clicks.
C Close as the display faces up and fi x it using the latch (B).
Use the tether to attach the stylus to the computer so you will not lose it.
There are holes (A) to attach it.
For model with dual touch, the tether and digitizer pen are already attached
to the computer at purchase.
Reference Manual "Port Replicator / Car Mounter"
Reference Manual "Camera"
13