Table of Contents
Advertisement
3 Electrical section
Important
The appliance must be installed in accordance with the
manufacturer's instructions. Incorrect installation, for which the
manufacturer accepts no responsibility, may cause damage to
persons, animals and property.
The connection of the appliance to earth is mandatory. The
manufacturer declines all responsibility for any inconvenience
resulting from the inobservance of this condition.
Before carrying out any work on the electrical parts of the appliance,
the appliance must be disconnected and locked off from the mains.
The appliance must be connected to the electrical network verifying that
the voltage corresponds to the value indicated on the specifications plate
and that the cables section of the electrical wiring can bear the load which
is indicated on the rating plate.
We recommend that the appliance is connected by a suitably qualified
person who will comply with the current IEE and local regulations.
It is recomended that the appliance is connected via a dedicated cooker
circuit using a double pole cooker switch with a rating equal or greater
than the total loading of the cooker, with a minimum opening between
the contacts of 3 mm.
Alternative connection methods may be available as long as they conform
to current IEE wiring regulations.
The power supply cable must not touch the hot parts and must be
positioned so that it does not exceed 75°C at any point.
Once the cooker has been installed, the switch must always be easily
accessible within 2 metres.
14
Advertisement
Table of Contents
