Table of Contents
Advertisement
Fitting the adjustable feet
The adjustable feet must be
fitted to the base of the cooker
before use (fig. 1.2). Rest the rear
of the cooker on a piece of the
polystyrene packaging exposing
the base for the fitting of the feet.
Fit the 4 legs by screwing them
tight into the support base as
shown in figure 1.3.
Levelling the cooker
The cooker may be levelled by screwing the lower ends of the feet IN or
OUT (fig. 1.4).
Fig. 1.4
Backguard (Some Models)
Before installing the cooker,
assemble the backguard "C"
(fig. 1.5).
* The backguard "C" can be found
packed at the rear of the cooker.
* Before assembling remove any
protective film/adhesive tape.
* Remove the two spacers "A" and
the screw "B" from the rear of the
cooktop.
* Assemble the backguard as
shown in figure 1.5 and fix it by
screwing the central screw "B"
and the spacers "A".
C
11
Fig. 1.2
Fig. 1.3
B
A
Fig. 1.5
Advertisement
Table of Contents
