Appendix C - Hotkey Commands - ADDER ADDERView Secure AVS-4128 User Manual

Appendix C - Hotkey commands

This section provides a summary of hotkey commands used on the secure switch. In
each case, press and release the listed keyboard buttons in the order shown.
Notes:
• No distinction is made between upper and lower case characters.
• The sequences shown here use the syntax: L CTRL | L CTRL | F11 | m which means:
Left Ctrl then Left Ctrl then F11 then m (where F11 is a function key)
Toggle between mouse modes (Absolute)
(Relative)
Alter mouse speed (Increase)
(Decrease)
System reset to factory defaults
Enter Terminal mode
Exit Terminal mode
Upload mode
Alternative layout presets (see Appendix B)
Default eight-host, single-head, dual-display layout
Eight-host, single-head, single-display layout
Eight-host layout with top/bottom displays
One dual-head host plus six single-head hosts
Eight single-head hosts with additional fixed display
Four-host dual-head layout
Note: The hotkeys assume use a of US keyboard.
L CTRL | L CTRL | F11 | c
L CTRL | L CTRL | F11 | b
L CTRL | L CTRL | F11 | +
L CTRL | L CTRL | F11 | -
L CTRL | L CTRL | F11 | r
L CTRL | R CTRL | t
L CTRL | R CTRL | x
L CTRL | L CTRL | L
L CTRL | L CTRL | F11 | F1
L CTRL | L CTRL | F11 | m
L CTRL | L CTRL | F11 | F2
L CTRL | L CTRL | F11 | F3
L CTRL | L CTRL | F11 | F7
L CTRL | L CTRL | F11 | d
Note: Altering mouse speed is only available in Absolute mode.
Use main keyboard + and - , not the numeric keypad.
Note: The switch takes 5 seconds before Upload mode becomes active.
21