Using CheckNet
Using the CheckNet utility, you can use the following functions.
Network information indication
RF signal level indication
GSM/GPRS modem power control
RAS (Dial-up network) control
SMS (Short Message Service)/Phone book
Running/Exiting
Running
CheckNet starts up at the same time as Windows, and
If
is not displayed, start up using the following menu.
Windows 2000
Select [Start] - [Programs] - [Panasonic] - [CheckNet] - [CheckNet].
Windows XP
Select [Start] - [All Programs] - [Panasonic] - [CheckNet] - [CheckNet].
Taskbar icon
(GSM)/
: Out of coverage
: Power off
: Initializing the GSM/GPRS modem
: SIM card error
: GPRS modem error
Exiting
Select
on the taskbar with the right button and select [Exit].
NOTE
The GPRS modem will be turned on/off automatically when the CheckNet starts up/
shut down (for supported models only).
This function can be disabled by using CheckNet. (
Tablet PC
(GSM+GPRS): RF signal level (
will be displayed on the taskbar.
page 11)
page 15)
9