Panasonic Toughbook CF-18BCAGCMM Operating Instructions Manual page 16

Using CheckNet
Operator List
Since the operator is usually selected automatically, it is not necessary to change it.
To change the settings manually, perform the following procedures.
Select the mode from [Operator selection mode].
Auto: the operator is selected automatically
Manual: keep trying to connect the operator se-
lected manually
Preferred: try to connect the operator selected manu-
ally. If it fails, the mode will change to
[Auto].
When you select [Manual] or [Preferred], select [Scan]
and select operator from the scanned list, then select
[Register].
NOTE
Since these settings are saved even after the GSM/GPRS modem is turned off, next
time the power is turned on the GSM/GPRS modem will try to connect using the last
settings.
We recommend that you change the mode to [Automatic] when moving out the
selected operator's range.
GPRS modem / SIM card information
Select [About] to confirm GPRS modem / SIM card information.
The information is displayed only when the GSM/GPRS modem's power is on.
[Wireless Module]
Model: Module name
Rev: Firmware version number
IMEI: International Mobile station Equipment Identity
[SIM card information]
IMSI: International Mobile subscriber Identity
ICC ID: Card identification number
16