Panasonic Toughbook CF-18BCAGCMM Operating Instructions Manual page 15

Using CheckNet
Options
Select [Options] to display the [Options] screen.
General
[Security]
PIN lock/unlock can be controlled.
To enable PIN lock
Select [PIN Lock] and enter the PIN code (4digits),
then select [OK].
([PIN Lock] will change to [PIN Unlock].)
Next time when CheckNet is started up after turning
off the GPRS modem, the PIN number will be re-
quested.
To disable PIN lock
Select [PIN Unlock] and enter PIN code (4digits), then
select [OK].
([PIN Unlock] will change to [PIN Lock].)
[Open main window at start-up]
To display the CheckNet window at start-up, add the check
mark. (In the default setting, the CheckNet window will
not be displayed at start-up.)
[Enable logging]
To save the AT command log, add the check mark.
(The log file will be saved as "CheckNet.log" in
[c:\util\drivers\gprs\data]*.)
* "c" indicates the drive where CheckNet is installed. This will
vary depending on your computer's setup.
[Keep module power when exiting]
To keep the GSM/GPRS modem power on after exiting
CheckNet, add the check mark.
15