Table of Contents
Advertisement
External battery control
1
1
2
3
10.3 External battery control via digital inputs
1 External energy management system (e.g. energy supply company)
2 External control box
3 Inverter control electronics
If External battery control via digital inputs is selected, the inverter receives the control
signals for charging and discharging the connected battery via the digital inputs of the
Smart Communication Board (SCB).
It is important that the digital inputs in the Webserver are configured accordingly.
Internal energy management remains active, but is overridden by the external specifications
for charging and discharging capacity.
The following commands are possible:
■
Charging/discharging of battery via output specified as a percentage
The specifications of the external provider must be observed.
Activating external battery control via digital inputs
1.
Connect inverter and computer.
2.
Launch an Internet browser.
3.
Call up the Webserver. To do this, enter the IP address of the inverter to which the
control box is connected in the browser's address bar and confirm with ENTER.
© 2023 KOSTAL Solar Electric GmbH
4
5
6
7
100 %
75 %
50 %
25 %
8
9
10
11
Connecting the inverter/computer, Page 125
12
13
14
15
198
Advertisement
Table of Contents
