How Do I Use My Product - Philips NORELCO 5000 Series Manual

'Unplug for use' symbol

How do I use my product?

- While the product charges, first the bottom
light of the battery status indicator flashes
and then lights up continuously. Next the
second light flashes and then lights up
continuously, and so on until the product is
fully charged.
- When the product is fully charged, all three
battery status indicator lights light up
continuously. After approx. 30 minutes, the
light goes out automatically.
5 After charging, remove the USB power source
from the power outlet and pull the small plug
out of the product.
The 'unplug for use' symbol flashes to remind you
to disconnect the USB power source from the
power outlet and remove the small plug from the
product before you switch it on.
Always check the product and all accessories
before using. Do not use the product or any
accessory if it is damaged, as this may cause
injury. Always replace a damaged part with
one of the original type.
Note: This product is waterproof. It is suitable for
use in the bath or shower and for cleaning under
the tap with water. For safety reasons, this
product can only be used without cord.
13
English