Philips NORELCO 5000 Series Manual page 20

20
English
Cleaning the pop-up trimmer
3 Rinse the hair chamber and shaving head
holder with warm water.
4 Remove the shaving heads. For detailed
instructions, see 'How do I replace the shaving
heads?'.
Note: Do not clean more than one cutter and
guard at a time, since they are all matching
sets. If you accidentally put a cutter in the
wrong shaving guard, it may take several
weeks before optimal shaving performance is
restored.
5 Clean the cutter and guard with warm water.
6 Shake off excess water.
7 Put the shaving heads back into the shaving
unit. For detailed instructions, see 'How do I
replace the shaving heads?'.
8 Insert the hinge of the shaving head holder
into the slot in the top of the shaving unit and
close the shaving unit.
Clean the trimmer after each use to prevent
clogging and damage.
Never dry the trimmer teeth with a towel or
tissue, as this may damage the trimmer teeth.