Philips NORELCO 5000 Series Manual page 9

- Always attach the USB cable to the USB power source and the
product first, then attach the USB power source to the power
outlet. To disconnect, set all controls to 'off' position. Then
remove the USB power source from the power outlet.
- Plug USB power source directly into power outlet. Do not use an
extension cord.
- Unplug USB power source before plugging in or unplugging the
product.
- The batteries used in this product may present a fire or chemical
burn hazard if mistreated. Do not disassemble, heat above
100 °C (212 °F) or incinerate.
- Only use original Philips accessories or consumables.
- Charge, use and store the product at a temperature between
5 °C and 35 °C.
- Keep product and batteries away from fire and do not expose
them to direct sunlight or high temperatures.
- If the product becomes abnormally hot or smelly, changes color
or if charging takes longer than usual, stop using and charging
the product and contact Philips.
- Do not place products and their batteries in microwave ovens or
on induction cookers.
- Do not open, modify, pierce, damage or dismantle the product
or battery to prevent batteries from heating up or releasing toxic
or hazardous substances. Do not short-circuit, overcharge or
reverse charge batteries.
- If batteries are damaged or leaking, avoid contact with the skin
or eyes. If this occurs, immediately rinse well with water and seek
medical care.
- When you handle batteries, make sure that your hands, the
product and the batteries are dry.
9
English