Philips NORELCO 5000 Series Manual page 22

22
English
1
2
1
2
3 Turn the retaining rings counterclockwise and
remove them. Place them aside in a safe place.
4 Remove the shaving heads from the shaving
head holder.
Discard the used shaving heads immediately
to avoid mixing them with the new shaving
heads.
5 Place new shaving heads in the holder.
6 Place the retaining rings back onto the shaving
heads and turn them clockwise to reattach the
retaining rings.
- Each retaining ring has two recesses that fit
exactly into the projections of the shaving
head holder. Turn the ring clockwise until your
hear a click to indicate that the ring is fixed.
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface, as this may
cause damage to the shaving heads.