KitchenAid 5KSMFVSP Use & Care Manual page 7

PRODUCT ASSEMBLY
ASSEMBLING THE ATTACHMENT TO THE STAND MIXER
1
Turn the Stand Mixer off and unplug.
3
Insert the attachment shaft Housing into
the attachment hub.
TIP: Place the bowl under the discharge disk or the Strainer Cone to catch ground or strained
food and place a smaller bowl under the open end to catch food waste.
W11373931A.indb 7
2
Remove the attachment hub cover.
4
Tighten the Stand Mixer attachment hub
knob until the attachment is completely
secured to the Stand Mixer.
7
8/28/2019 8:00:51 PM