Megger BVM Cal kit User Manual page 3

BVM Cal kit
Calibration system for BVM units
User's Manual
NOTICE OF COPYRIGHT & PROPRIETARY RIGHTS
© 2016-2019, Megger Sweden AB. All rights reserved.
The contents of this manual are the property of Megger Sweden AB. No part of this work may be reproduced or transmitted in any form or
by any means, except as permitted in written license agreement with Megger Sweden AB. Megger Sweden AB has made every reasonable
attempt to ensure the completeness and accuracy of this document. However, the information contained in this manual is subject to change
without notice, and does not represent a commitment on the part of Megger Sweden AB. Any attached hardware schematics and technical
descriptions, or software listings that disclose source code, are for informational purposes only. Reproduction in whole or in part to create
working hardware or software for other than Megger Sweden AB products is strictly prohibited, except as permitted by written license
agreement with Megger Sweden AB.
This device contains software that is licensed under the General Public License (GPL). If requested, a copy of the source code licensed under
the GPL can be sent to you. Please e-mail your request to se-gplrequest@megger.com. Please note that no questions regarding the content
of the source code can be answered. You may be charged a fee covering the costs of sending you the source code.
TRADEMARK NOTICES
Megger® and Programma® are trademarks registered in the U.S. and other countries. All other brand and product names mentioned in this
document are trademarks or registered trademarks of their respective companies.
Megger Sweden AB is certified according to ISO 9001 and 14001.
Postal address: Visiting address:
Megger Sweden AB Megger Sweden AB
Box 724 Rinkebyvägen 19
SE-182 17 DANDERYD SE-182 36 DANDERYD
SWEDEN SWEDEN
T +46 8 510 195 00
E seinfo@megger.com
www.megger.com
CJ0125BE ZP-CJ01E BVM CAL KIT 3