Redliro SL-Q20 Product Use Manual

Redliro SL-Q20 Product Use Manual

Hide thumbs Also See for SL-Q20:

Advertisement

REDLIRO TREADMILL
SL-Q20
MODEL
PRODUCT USE GUIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SL-Q20 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Redliro SL-Q20

  • Page 1 REDLIRO TREADMILL SL-Q20 MODEL PRODUCT USE GUIDE...
  • Page 2: Table Of Contents

    SERVICE CONTENT Thank you for purchasing this Redliro product. Questions, problems, missing parts? Before returning to your retailer, contact our Customer Service Department to receive more complete service, please email your order number to: service@redliro.com Service Response Safety Information Time...
  • Page 3: Safety Information

    SAFETY INFORMATION PRODUCT SPECIFICATIONS Product configuration Technical parameters TO REDUCE THE RISK OF INJURY, PLEASE READ INSTRUCTIONS IN FULL BEFORE USE. Input voltage 110V Speed range 0.5-4.0mph Maximum load bearing 265LBS Package size 51.96x25.39x6.22inches • Intended for at-home use only. Please only use in an area with 3 - 6 feet of free space around your device.
  • Page 4: Package List

    PACKAGE LIST PRODUCT STRUCTURE NOTE: THE RUNNING BELT IS MADE OF HEAD AND TAIL SPLICING, THERE ARE SEAM MARKS, IT IS NORMAL PROCESS PHENOMENON, AND DOES NOT AFFECT THE NORMAL USE OF THE TREADMILL. Motor Upper Cover Display Panel...
  • Page 5: Introduction To Display

    INTRODUCTION TO DISPLAY The “TIME” window has two display modes. The "SPEED" window displays the current running speed, and the speed range is 0.5mph~4.0mph. • Standard mode counts from 00:00 ~ 99:00 and resets to 0 when it reaches 99:00.
  • Page 6: Remote Control Instructions

    REMOTE CONTROL INSTRUCTIONS FUNCTION OF THE REMOTE CONTROL Start/Stop button: Press Start/Stop button in standby mode and the treadmill will start after 3 seconds. The default speed is 0.5 NOTE: TO USE THE REMOTE CONTROL, YOU MUST FIRST ESTABLISH A NEW CONNECTION mph.
  • Page 7: Battery Replacement

    BATTERY REPLACEMENT The 12 preset programs have the following speeds: Step 1: Push back to remove the cover and install the battery. SET TIME/20=RUNNING TIME FOR EACH SECTION TIME PROGRAMA SPEED SPEED SPEED SPEED SPEED andinstallthebattery. Step 2:...
  • Page 8: Instructions For Using The Treadmill

    INSTRUCTIONS FOR USING THE TREADMILL HOW TO USE THE TREADMILL IN PRESET MODE 1. How to choose a program In standby mode, you can select from 12 preset automatic programs (P1-P12) by pressing the P button on PREPARATION BEFORE USE: the remote control 2.
  • Page 9 Time setting: 3. How to turn on the treadmill In standby mode, press the M button on the remote control and adjust time by pressing the +/- buttons to Once you've set up your desired program, press the Start/Stop button on the remote control and the running adjust its duration in 1 minute increments.
  • Page 10: Product Maintenance

    BLUETOOTH PAIRING GUIDE PRODUCT MAINTENANCE PLEASE STAYING WITHIN RANGE OF YOUR TREADMILL WHILE YOU HAVE YOUR DEVICE TO REGULAR MAINTENANCE IS IMPORTANT FOR YOUR SAFETY AND TO EXTEND THE LIFE OF KEEP THE CONNECTION. YOUR PRODUCT. PLEASE CHECK AND TIGHTEN ALL PARTS BEFORE YOUR FIRST USE AND REPLACE WORN PARTS OVER TIME AS NEEDED.
  • Page 11: Routine Maintenance

    1. The main body is not in kept in a stable position. Note: Search “REDLIRO” on YouTube to find videos on how to adjust the running belt. 2. The user's feet are not in the center of the running belt.
  • Page 12: Troubleshooting And Handling

    TROUBLESHOOTING AND HANDLING Issue 4: "----" is displayed and the treadmill doesn’t work. • If the power indicator of the lower control board is on, please re-insert the connecting wire between the lower control board and the display board when the power is off (the glue on the terminal can be removed by rubbing with an alcohol soaked cotton swab and leaving for 3 minutes before scraping it off.) Check whether...
  • Page 13 Issue 12: Abnormal noise under the upper cover of the treadmill. • E08: Poor contact of motor power line or motor failure. • Please confirm whether the product is placed on a carpet of more than 0.5inches thick. If so, please move it (1) If it is a new product, please open the top cover (with the treadmill powered off) and check whether the to the floor or use a treadmill pad.
  • Page 14: Workout Guide

    6. Improper Operation, modification, handling, storage, misuse or neglect of the product. Stretched parts: Hamstrings, lower back and groin. 7. Redliro will, at its sole discretion, repair or replace, any part that proves to be defective in normal 3. Calf/ tendon stretch household use.
  • Page 15 If you have any problem, please feel free contact us, within 24 hours we will replay ASAP SL-Q20 Find Assembly Tutorial on Redliro YouTube Email: service@redliro.com Company: MIXDOLLAR INC Address: 4975 Miller ST, Wheat Ridge CO, 80033, United States @Redliro...

Table of Contents

Save PDF