Table of Contents
Advertisement
2. Clean the surfaces of the humidity
sensor wiping off the metal surface
several times.
11.5 Cleaning the drum
WARNING!
Disconnect the appliance
before you clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and
drum lifters. Dry the cleaned surfaces
with a soft cloth.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 Error Codes
The appliance does not start or it stops during operation.
First try to find a solution to the problem (refer to the table). If the problem persists,
contact the Authorised Service Centre.
WARNING!
Deactivate the appliance before carrying out any check.
In case of major problems, the acoustic signals operate, the display shows an
error code and the
Error code
E50
Start/Pause button may flash continuously:
Possible cause
Appliance motor overloaded.
Too much laundry or entrap in
the drum.
CAUTION!
Do not use abrasive
materials or steel wool to
clean the drum.
11.6 Cleaning the control panel
and housing
Use a standard neutral soap detergent to
clean the control panel and housing.
Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.
CAUTION!
Do not use furniture cleaning
agents or cleaning agents
which can cause corrosion.
11.7 Cleaning the airflow slots
Use a vacuum cleaner to remove fluff
from the airflow slots.
Remedy
The programme was not comple‐
ted. Remove the laundry from
the drum, set the programme
and restart the cycle.
ENGLISH
19
Advertisement
Table of Contents
