Replacement
4.27 Sheet Battery Adhesive Top
Follow the 3.1 – 3.4 Disassembly instructions!
Prepare the new Sheet Battery Adhesive Top.
Carry out the Installation as described below.
Follow the 5.5 – 5.8 Reassembly instructions!
The Sheet Battery Adhesive Top shouldn't been removed
since the Battery will then be imminent. In case of damage,
replace the Battery.
INSTALLATION
Prepare the new Sheet Battery Adhesive Top when
a new Battery is used.
Align the Sheet horizontally in the center. It shouldn't
cover the tape on the Battery.
Scrap! Not to be reused!
Do not remove the Sheet Battery Adhesive Top from
the Battery. If damaged, scrap it with the Battery.
Press with a finger to secure the attachment.
Check and confirm that the Sheet Battery Adhesive Top
is flat with no wrinkles.
1285-2552 Rev 8
© Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
53(80)