Replacement
4.32 Spacer 10 x 4
Follow the 3.1 – 3.6 Disassembly instructions!
Prepare the new Spacer 10 x 4.
Carry out the Installation as described below.
Follow the 5.3 – 5.8 Reassembly instructions!
The Spacer 10 x 4 shouldn't been removed since the flex
of the Main Cover will then be imminent.
INSTALLATION
Prepare the new Spacer 10 x 4 when a new Main Camera
is used. Place a new Spacer 10 x 4 in the correct position.
Align by the top left corner of the BtB connector. Press
with your finger to secure the attachment.
1285-2552 Rev 8
© Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
57(80)