Adhesive Mic Con - Sony Xperia Z2 Working Instructions

Replacement

4.10 Adhesive MIC Con

Follow the 3.1 – 3.3 Disassembly instructions!
Carry out the Removal as described below.
Prepare the new Adhesive MIC Con.
Carry out the Installation as described below.
Follow the 5.6 – 5.8 Reassembly instructions!
REMOVAL
Lift the flex over the MIC with the Flex Film Assembly Tool.
Remove the Adhesive MIC Con. Remove all remains of
the adhesive residue found on the Holder Loud speaker
and the MIC.
Scrap! Not to be reused!
1285-2552 Rev 8
© Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
15(80)