Problem Areas
1.2
Keys
1.2.1 Camera Key
Check:
Inspect the Key Camera and the Gasket Key Cam.
Action:
1. If the Key Camera or the Gasket key Cam is dirty or
clogged – clean them.
2. If any of these two parts are damaged – replace that part.
Check:
Inspect the connection between the FPC Relay and the
main PBA.
Action:
1. If not properly connected – disconnect and reconnect.
2. If dirty or oxidized – clean the BtB connector.
Check:
Inspect the FPC Relay.
Action:
1. If the FPC Relay is damaged – replace it.
2. Replace the Main PBA.
1273-7035 Rev 3
© Sony Mobile Communications AB – Company Internal
Troubleshooting Guide (mech)
5(40)