Table of Contents
Advertisement
4. Do not use strong or abrasive detergents
when cleaning the camera body.
Use a dry cloth to clean the camera when it
is dirty.
When the dirt is hard to remove, use a mild
detergent and wipe gently. Care should be
taken not to scratch the dome cover when
wiping it.
Afterwards, wipe off the remained part of the
detergent in it with a dry cloth.
5. Never face the camera towards the sun.
Whether the camera is in use or not, never
aim it at the sun or other extremely bright
objects. Otherwise, blooming or smear may
be caused.
6. Never face the camera at a place exposed
to light sources for a long time.
If light sources such as spot light cause
burn-in on the display screen, part of image
may discolor due to deterioration of color fil-
ter in CCD when changing aim of the cam-
era etc.
7. Do not install this camera upside down.
This camera is designed for mounting on the
ceiling or wall. Using this camera installed
upside down, for example, mounted on the
floor, may cause malfunction.
8. If "OVER HEAT" sign appears on the mon-
itor screen.
The temperature inside the camera exceeds
the normal level because of a malfunction of
the cooling fan etc. If it happens, turn the
power off immediately and refer servicing to
qualified service personnel.
9. Do not operate the camera beyond the
specified temperature, humidity or power
source ratings.
Do not use the camera in an extreme envi-
ronment where high temperature or high
humidity exists. Do not place the camera
near heat sources such as radiators, stoves
or other units that produce heat.
Use the camera under conditions where
temperatures are between –10°C and +50˚C
(14˚F - 122°F) [Recommended temperature:
+40˚C (104˚F)], and humidity is below 90%.
The input power source is 24 V AC.
6
10. Do not install the camera near the air out-
let of an air conditioner.
The lens may become cloudy due to con-
densation if the camera is used under the
following conditions.
• Rapid
temperature
switching the air conditioner on and off.
• Rapid temperature fluctuations due to
frequent door opening and closing.
• Use in an environment where eyeglass-
es become foggy.
• Use in a room filled with cigarette smoke
or dust.
If the lens becomes cloudy due to conden-
sation, remove the dome cover and wipe
all moist surfaces with a soft cloth.
11. Consumables
Parts having contacts such as the lens-drive
motors, cooling fan motor and slip-rings
inside the camera are subject to wear with
time. About replacement and maintenance
of such parts, please ask the nearest service
center.
12. Do not aim the camera at the same object
for a long time.
Burn-in of an image may be caused on the
fluorescent screen of CRT.
• Matsushita Electric Industrial Co., Ltd. here-
with declares that it will not be liable for any
damage, whether direct or indirect, caused
by using for business transaction or security,
or malfunctioning of this product.
fluctuations
by
Advertisement
Table of Contents
