Appendix - Panasonic WV-CS564 Operating Instructions Manual

APPENDIX

Shortcuts
Shortcut operations are available to controllers having the CAM FUNCTION key. Pressing numeric key(s)
for one digit up to three digits then CAM FUNCTION key implements the respective functions as follows.
The CAM FUNCTION key is abbreviated to [CAM FUNC] here.
Function
Selecting a PRESET position From #1 to #32
#1
#10
#32
AUTO PAN
ON
OFF
Speed Up
Speed Down
Setting Start Point
Setting End Point
Setting PAN Reverse
AUTO MODE
MODE Off
SEQ On
SORT On
ENDLESS PAN
On
Off
BLC
On
Off
AUTO FOCUS
AUTO
MANUAL
AF On (Activate)
HOME POSITION
Move to HOME
CAMERA ID
On
Off
EL-ZOOM
On
Off
Notes:
• Shortcut operations marked with * will change parameter settings only. Actual operation takes place
when the conditions for the changed settings are met.
• Shortcuts may be ignored while PAN/TILT, ZOOM or FOCUS is in operation.
• PATROL LEARN saves only [1] through [6]+[4], [1]+[6]+[9] and [1]+[7]+[0] in the memory.
• PATROL PLAY stops when a shortcut other than [1]+[6]+[9] or [1]+[7]+[0] is entered.
53
Key
[1] + [CAM FUNC]
[1] + [0] + [CAM FUNC]
[3] + [2] + [CAM FUNC]
[6] + [5] + [CAM FUNC]
[6] + [6] + [CAM FUNC]
[6] + [7] + [CAM FUNC]
[6] + [8] + [CAM FUNC]
[6] + [9] + [CAM FUNC]
[7] + [0] + [CAM FUNC]
[7] + [4] + [CAM FUNC]
[7] + [1] + [CAM FUNC]
[7] + [2] + [CAM FUNC]
[7] + [3] + [CAM FUNC]
[7] + [6] + [CAM FUNC]
[7] + [7] + [CAM FUNC]
[8] + [4] + [CAM FUNC]
[8] + [5] + [CAM FUNC]
[8] + [6] + [CAM FUNC]
[8] + [7] + [CAM FUNC]
[8] + [8] + [CAM FUNC]
[8] + [9] + [CAM FUNC]
[9] + [3] + [CAM FUNC]
[9] + [4] + [CAM FUNC]
[9] + [8] + [CAM FUNC]
[9] + [9] + [CAM FUNC]
Function
RESTART
Begin [1] + [0] + [0] + [CAM FUNC]
Memorize PRESET From #1 to #32**
Position #1 [1] + [0] + [1] + [CAM FUNC]
Position #10 [1] + [1] + [0] + [CAM FUNC]
Position #32 [1] + [3] + [2] + [CAM FUNC]
PATROL
PLAY [1] + [6] + [5] + [CAM FUNC]
STOP [1] + [6] + [6] + [CAM FUNC]
LEARN (Start) [1] + [6] + [7] + [CAM FUNC]
IRIS
Open [1] + [6] + [9] + [CAM FUNC]
Close [1] + [7] + [0] + [CAM FUNC]
EL-SHUTTER
On [1] + [7] + [1] + [CAM FUNC]
Off [1] + [7] + [2] + [CAM FUNC]
Speed Up [1] + [7] + [3] + [CAM FUNC]
Speed Down [1] + [7] + [4] + [CAM FUNC]
AGC
On [1] + [7] + [5] + [CAM FUNC]
Off [1] + [7] + [6] + [CAM FUNC]
LL SYNC phase
INC [1] + [8] + [5] + [CAM FUNC]
DEC [1] + [8] + [6] + [CAM FUNC]
PAN
180° turn [1] + [8] + [7] + [CAM FUNC]
CLEANING
On [1] + [8] + [8] + [CAM FUNC]
Off [1] + [8] + [9] + [CAM FUNC]
Key