Traxxas MAXX 89086-4 Owner's Manual page 27

Removing the front suspension module
1. Remove the two 4x20mm countersunk cap screws from the front
skidplate on the bottom of the chassis.
2. Remove the 3x15mm button-head cap screw from the steering link.
3. Remove the seven 4x12mm button-head cap screws from the chassis
brace (1), front shock tower (2), and chassis (4).
4. Pull the front suspension assembly away from the chassis. Pull the
assembly away firmly.
To reassemble the modules, follow the steps in reverse order.
Removing the rear suspension module
1. Remove the two 4x20mm countersunk cap screws from the center
skidplate on the bottom of the chassis.
2. Remove the two 4x12mm button-head cap screws that secure the
rear bulkhead to the bottom of the chassis.
3. Remove the two 3x10mm cap screws from the gear cover. Remove
the gear cover.
4. Remove the 4x8mm button-head cap screw from the motor plate.
5. Remove the two 4x12mm button-head cap screws from the rear
shock tower.
6. Remove the two 4x22mm button-head cap screws that secure the
rear bulkhead to the top of the chassis.
7. Pull the rear suspension assembly away from the chassis. Pull the
assembly away firmly.
To reassemble the modules, follow the steps in reverse order.
MAINTAINING YOUR MODEL
3. 3. 4x12mm
BCS
3. 3. 3x10mm CS
5. 5. 4x12mm BCS 4x12mm BCS
6. 6. 4x22mm
BCS
4. 4. 4x8mm 4x8mm
BCS BCS
2. 4x12mm
BCS
1. 4x20mm CCS
2. 2. 3x15mm
BCS
1. 4x20mm
CCS
5. 5. 4x12mm BCS 4x12mm BCS
MAXX • 27