■ ■
Listening to External Equipments
Listening to an External MD
Recorder/Tape Deck
You can play an external MD recorder, tape deck, etc. through the
system.
■
First make sure that the external equipment is properly connect-
ed to the System. (See page 4.)
■
1. Set the VOLUME control to minimum.
■
2. Press the MD/TAPE button.
When the System is in Standby mode, the System is automati-
cally turned on.
"MD/TAPE" appears on the display.
■
3. Start playing the external equipment.
■
4. Adjust the VOLUME control to the desired
listening level.
■
5. Apply sound effects, if you wish.
■
Press the BASS CONTROL button to reinforce the bass sound.
■
Press the BASS/TREBLE button to control the tone. (See "Tone
Control" on page 7.)
To exit MD/TAPE mode
You will automatically switch out of MD/TAPE mode when you se-
lect another source.
Note: You can also record the System's output signal to the exter-
nal equipment. For operation, refer to the equipment's own
instructions.
Listening to Auxiliary Equip-
ment
You can listen to a turntable or other auxiliary equipment.
■
First make sure that the external equipment is properly connect-
ed to the System. (See page 5.)
■
1. Set the VOLUME to minimum position.
■
2. Press the AUX button.
When the System is in Standby mode, the System is automati-
cally turned on.
"AUX" appears on the display.
13
Downloaded from:
https://www.usersmanualguide.com/
REMOTE CONTROL RM-RXFS8000
DIMMER
SLEEP
POWER
DISPLAY
FM MODE
AUX
AUX
SUBWOOFER
AUTO
LEVEL
PRESET
CD
PROGRAM
RANDOM
REPEAT
BASS
TREBLE
CANCEL
VOLUME
GAIN SELECT
UP
SET
DOWN
MD/TAPE
MD
TUNER
CD
/TAPE
BAND
VOLUME
TIMER/
BASS
PRESET
SNOOZE
CONTROL
TUNING
DOWN
MULTI CONTROL
UP
CLOCK
POWER
OPEN/CLOSE
AUX
TUNER
CD
AUX
MD/TAPE
BAND
VOLUME GAIN SELECTOR
MD/TAPE
0 dB
-6dB
-12dB
■
3. Start playing the auxiliary equipment.
■
4. Adjust the VOLUME control to the desired
listening level.
■
5. Apply sound effects, if you wish.
■
Press the BASS CONTROL button to reinforce the bass sound.
■
Press the BASS/TREBLE button to control the tone. (See "Tone
Control" on page 7.)
To exit AUX mode
You will automatically switch out of AUX mode when you select
other source.
Note: For operation of the auxiliary equipment, refer to its own In-
structions.