JVC FS-8000J Manual page 8

CAUTION: Make all connections before plugging the System into an AC power outlet.
Connecting an MD Recorder/Tape Deck
Connect (optional) signal cords between the System's MD/TAPE IN/OUT terminals and the output/input terminals of the external MD recorder,
tape deck, etc.
You can then listen to the external source through the System, or record the System's CD player or tuner to the external unit.
Connecting Auxiliary Equipment
Connect an (optional) signal cord between the AUX terminals on the System and the output terminals of your auxiliary equipment, (e.g. turn-
table). You can listen to this source.
Connecting an MD Recorder, etc (Digital Output)
Unplug the cap and connect an (optional) optical digital cord between the System's OPTICAL DIGITAL OUT terminal and the input terminal
of the MD recorder, etc.
You can record the digital output signal from the System's CD Player to the MD recorder, etc.
Connecting the AC Power Cord to the Unit
Firmly insert the supplied AC power cord into the AC inlet on the
back of the Unit.
The provided AC power cord for this unit has certain one-way di-
rection connections to prevent electric shock. Refer to the illustra-
tion for correct connection.
CAUTIONS:
• ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM TO AVOID MALFUNCTION OR DAM-
AGE TO THE SYSTEM.
• BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE SYS-
TEM IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.
Now you can plug the AC power cords of the Unit and the Powered Subwoofer into the wall
outlets, and your System is at your command!
5
Downloaded from: https://www.usersmanualguide.com/
Signal cord (optional)
R L
Pin-plug x 2
IN
MD/TAPE
OUT
Signal cord (optional)
Pin-plug x 2
R L
AUX
Pin-plug x 2
Cap
OPTICAL
DIGITAL
OUT
Optical digital cord (optional)
MD recorder or tape deck (optional)
Pin-plug x 2
Pin-plug x 2
Signal cord (optional)
Pin-plug x 2
MD recorder, etc. (optional)
AC IN
Power cord
Turntable (with built-in equalizer)
(optional)